Drawmer press box - KICKBOX 4X4

The Drawmer Kickbox 4x4 press box allows the active distribution of four separate signals to four groups of four outputs, isolated from each other.
Each of the four N inputs accepts a line or microphone level, has adjustable gain, a 48 V phantom power supply and an LED VU meter.
Each N group of 4 outputs can reproduce the signal from group N-1, providing great flexibility. We can thus, for example, distribute the signal from input 1 to the 16 outputs.
It is also possible to mix the signals from inputs 1 and 2; the sum is then distributed to the four outputs of channel 1.

All outputs, symmetrical, are isolated by transformer and thus offer total galvanic isolation. Each input can be routed – or not – to a mono mix bar for headphone monitoring.
The KickBox can be powered from the mains (100-220 volts, 50-60 Hz), or from an external battery of 9 to 18 volts. When mains power is present, the battery is electronically disconnected to preserve its charge. An indicator light changes from green to red when the battery voltage falls below 10.8 volts (for lead acid batteries).

Features :
Entries:
4 microphone inputs (48 V. Ph, Dyn. )/line, XLR3F x 4.

Treatment :
Mic input impedance: 1 kohms
Line input impedance: 4.7 kohms
Maximum admissible input level: +21 dBu (ref. 0.775 volts)
Noise level compared to the microphone input loaded with 150 ohms: -128 dBu
DHT for a signal of +4 dBu: 0.005%
Noise level on line input at +4 dBu: -100 dBu
Crosstalk between channels: 87 dB at 20 kHz
Bandwidth: 15 Hz to 45 kHz at -1 dB

Food & Measurements:
Consumption: 12 watts (without Phantom)
Dimensions: 30.5cm x 14.5cm x 27cm
Mass, case included: 4.3 kg.

Dimensions :

Weight:	3.50kg
Categories:	Technical Her Accessory